Skip to main content

Well Pump Service in Pickens County

Well Pump Repair in Jasper, GA

No water, pressure that surges, or a pump that never shuts off. Ryan repairs and replaces well pumps for Jasper and Pickens County homes. Call or text and tell him what you see.

Are you on a well or on county water?

Short answer: A well pump moves water from your well to your house. When it fails you get no water, weak or surging pressure, or a pump that runs without stopping.

  • Who it is for: Jasper and Pickens County homes on a private well, which is a home with no city or county water bill.
  • Check first: the breaker for the well pump. A tripped breaker is the simple cause. If it trips again, do not keep resetting it.
  • Urgent: no water at all, or a pump that runs and runs. Do not wait on either one.
  • Can wait: pressure that is a little off but steady. Still call, because it often means a tank or switch is wearing out.

Not every Jasper address has a well. The Pickens County Water and Sewer Authority sells water to homes on its lines, and its 2023 water quality report says that water is bought from other utilities, including the City of Jasper. The City of Jasper also runs its own water system. A home with no water bill from any of them is almost certainly on a well, and the pump in the ground is what stands between you and the tap.

Georgia does not regulate private wells. The Georgia Department of Public Health says it is the well owner's job to watch the quality and safety of the water. That includes keeping the pump, the tank and the switch working.

Signs the pump is the problem

Write down what you noticed first and when it started. Ryan will ask, and it narrows the problem fast.

Pump quit on you?

Text Ryan what you see: no water, a pump that never stops, or a gauge that jumps. A photo of the tank and gauge helps. He answers his own phone, day or night.

Pump, pressure tank or switch?

A well system has three parts that fail on their own: the pump, the pressure tank and the pressure switch. They look alike from the outside. A pump that clicks on and off quickly is often a tank problem, not a pump problem, and replacing the pump would not fix it.

Ryan installs well bladder tanks as well as pumps, so he can fix the part that is actually failing. He explains what he found and gives you a free estimate before any work starts.

Gray Amtrol Pro-Line well pressure tank with a pressure switch, gauge and brass fittings

A photo of your tank, gauge and switch helps when you text.

When the power goes out, so does the water

A well pump runs on electricity. When the power goes out, the pump stops and so does your water. Pickens County has mountains above 3,000 feet in the north and occasional winter snow, and any outage stops the pump. When the power comes back and the water does not, check the pump breaker first, then call or text Ryan. There is more in what to do about well water during a power outage.

Test the water when the pump work is done

Georgia DPH recommends private well owners test for coliform bacteria every year. It also recommends a chemical screening every 3 years, which UGA Extension offices offer. DPH lists damaged well parts and poorly kept septic systems among the ways coliform can reach a well. If your pump or well parts were worked on, testing is a sensible next step. More in well water testing in Georgia.

What a customer wrote

★★★★★

"The determination that Ryan displayed to get my septic system operational on a Sunday is just about unprecedented these days. Not afraid of hard work at a good price. Job two: Ryan installed a new bladder tank for my well. He showed up promptly and finished quickly at a better than fair price."

Marty R. Google review, November 2024

Common Questions

Well Pump Questions from Jasper Homeowners

How do I know if it is the pump or the pressure tank?

You often cannot tell from the tap. A pump that clicks on and off fast usually points to the tank, and no water at all can be the pump, the switch or the breaker. Ryan checks each one and tells you what he found.

Should I repair the pump or replace it?

It depends on what failed. Ryan looks at it, explains both options, and gives you a free estimate before any work starts.

My water went out after a storm. What do I check first?

Look at the breaker for the well pump. If it is on and you still have no water, call or text Ryan. If it keeps tripping, leave it off and call.

How often should I test my well water?

Georgia DPH recommends testing for coliform bacteria every year and a chemical screening every 3 years. Your local UGA Extension office can set up the tests.

Does a failing pump make the water cloudy or sandy?

Not always. Cloudy or sandy water can have more than one cause, so describe it when you call. There is more in cloudy or sandy well water.

How do I get a price?

Call or text Ryan. The estimate is free, there is no trip fee, and you know the price before any work starts.

Well trouble in Jasper? Call or text Ryan.

Free estimate, no trip fee. You know the price before any work starts.